How Do You Fix Up A Table Without Manual?

[Staff69]

Wow. I can find the pic. Didn't know you can do that. Sorry I'm quite noob when it comes to IT stuff.

This table

Edited October 2, 2017 by Staff69

[Adrianli]

I love this type of challenge. Fixing things up without a manual.

[Lala81]

I love this type of challenge. Fixing things up without a manual.

 

i would have done the same.

Just hantam whack, if du lan cannot succeed then just throw the whole table away 

[Friendstar]

no problem boss... peasant volunteer to fix for you

 

just go for work as usual but leave your shu qi at home to open the door for me can already

 

let me handle the screwing and banging

 

ð

That's damn funny haha

[Vratenza]

Shouldn't be rocket science unless there are parts missing....a finished final product picture from all angles should help. 

 

Googling for manual not much help here since it is a MIC product unlike ikea or lego.

 

 

 

[BabyBlade]

Shouldn't be rocket science unless there are parts missing....a finished final product picture from all angles should help. 

 

Googling for manual not much help here since it is a MIC product unlike ikea or lego.

 

I suspect there are parts missing. In the packet of parts that came along with the desk, there are many many screws of different sizes but there is one short screw. And you know what's funny? There is only ONE short screw. Lol.

 

I emailed ezbuy regarding this. The TB seller replied back saying everything is correct without asking me to send pictures over to verify. Haha.

[Jman888]

I suspect there are parts missing. In the packet of parts that came along with the desk, there are many many screws of different sizes but there is one short screw. And you know what's funny? There is only ONE short screw. Lol.

 

I emailed ezbuy regarding this. The TB seller replied back saying everything is correct without asking me to send pictures over to verify. Haha.

 

 

you still haven't post the picture of the table here, there must be a place for that one short screw, dun discriminate a short screw 

[Adrianli]

I suspect there are parts missing. In the packet of parts that came along with the desk, there are many many screws of different sizes but there is one short screw. And you know what's funny? There is only ONE short screw. Lol.

 

I emailed ezbuy regarding this. The TB seller replied back saying everything is correct without asking me to send pictures over to verify. Haha.

 

Screws are cheap cheap lah. Just bring sample to those shop selling screws and can get similar type.

 

I always go to the one at Kelantan Lane.

[Vratenza]

I know of a couple of  people who goes to Kelantan for screws too 

 

dio boh @picnic06-biante15, @mustank

Screws are cheap cheap lah. Just bring sample to those shop selling screws and can get similar type.

 

I always go to the one at Kelantan Lane.

 

[Vratenza]

if you lay out the parts on the floor (if the part have a few holes, take more pictures of the close up of the different angle) with all the screws arrange in similar type bunches, most of us here will be able to try figure it out for you which part goes where and which screws for which holes. Also not forgetting the final product picture you can grab from the seller website.

 

This is just like a jigsaw puzzle, just in 3D. 

 

I suspect there are parts missing. In the packet of parts that came along with the desk, there are many many screws of different sizes but there is one short screw. And you know what's funny? There is only ONE short screw. Lol.

 

I emailed ezbuy regarding this. The TB seller replied back saying everything is correct without asking me to send pictures over to verify. Haha.

 

[BabyBlade]

This is the table in question.

 

[RadX]

I know of a couple of  people who goes to Kelantan for screws too 

 

dio boh @picnic06-biante15, @mustank

 

polyclinic?

This is the table in question.

 

table.jpg

 

 

looks easy enuf

[BabyBlade]

if you lay out the parts on the floor (if the part have a few holes, take more pictures of the close up of the different angle) with all the screws arrange in similar type bunches, most of us here will be able to try figure it out for you which part goes where and which screws for which holes. Also not forgetting the final product picture you can grab from the seller website.

 

This is just like a jigsaw puzzle, just in 3D. 

 

I'll try to do that tonight! 

[Adrianli]

This is the table in question.

 

table.jpg

 

Looks easy to install. But looks pretty small table. So should not be a problem for you.

[Jman888]

This is the table in question.

 

table.jpg

 

 

it has to be PINK    

 

for $45 i worry about how stable it can be    

 

from the picture, looks like it can be assembled in two part, the shelving and the table, then connect them with the 'wooden nail'.

[Adrianli]

it has to be PINK    

 

for $45 i worry about how stable it can be    

 

from the picture, looks like it can be assembled in two part, the shelving and the table, then connect them with the 'wooden nail'.

 

Its called a dowel.

[Galantspeedz]

I suspect there are parts missing. In the packet of parts that came along with the desk, there are many many screws of different sizes but there is one short screw. And you know what's funny? There is only ONE short screw. Lol.

 

I emailed ezbuy regarding this. The TB seller replied back saying everything is correct without asking me to send pictures over to verify. Haha.

 

At the bottom of this page seems to be the screws that comes with it.. see if it tallies

 

https://item.taobao.com/item.htm?id=555612260546&toSite=main

 

this seller says there is instruction video... 

 

so you should request the same from your seller

 

Edited October 3, 2017 by Galantspeedz

[Galantspeedz]

http://v.youku.com/v_show/id_XMTMyNjUyNzY1Ng==.html?from=y1.7-1.2&qq-pf-to=pcqq.c2c

 

Seller gave me this instruction video.. have a look