Search the Community
Showing results for tags 'Surface'.
Found 19 results
-
simply amazing
- 17 replies
-
- 12
-
-
This kitchen worktop has been serving us for the past 7 years, nothing much being done by just wiping over it with a damp cloth since day 1. By looking at it tells me that I have to do something about it. Before Tape up done, let's hit it 50/50 Afters, process was done with Duragloss #101 and #951
-
http://www.todayonline.com/singapore/law-a...derground-space so if u decide to build a 10 level underground bunker, garmen may not allow if u found a goldmine down there, u also may not own it? lol
-
Hi guys, After my recent servicing with a workshop, my car paint surface feels rough at many places, like very fine sandpaper. Originally it was very smooth and slick. Any idea what are those things on my car paint? Dust, metal particles? Can they be easily removed by Claybar? Or should i go back to the workshop and demand them to help me clean up? Should have done detailed inspection before i leave the workshop...
-
Recently , due to my careless, I went over a kurb on my right rear side tyre. I was assuming it is a normal knock , nothing much. Next day, found out tyre went flat and went to workshop for repair. The technician found out the leakage is from the side surface( see picture). He did the repair(using rubber injection to prevent leak) and advice this won't last long, the side surface don't have wire mesh protection. he recommend to change a new tyre ASAP before the tyre will bust on road and cause accident. If really require to change the new tyres , it is a question to save the $$$ or wait until it burst again , my tyre are just 3 months old. I had been driving for nearly a week after the repair, so far so good , had no leakage , no weird steering feeling. Could I get some advice that is technician trying to b-u-ll-s-hi-t me by his sales talk ? Or it is highly recommend to change ASAP , don't save the money in exchange for the future accident ?
-
Hi, my friend got the bodykit spary painted at a shop. However after collecting his car door sloping side (top half) of the doors on the left feels rough caused by paint residue from the car sparying beside it. He have try Autoglxx Resin Polish or but could not solve the problem. Options: - Not sure to go back and pay the workshop to polish it away by G3 polish - orginial honda paint will be damage? - Or get some aftermarket polish...Pls recommend me what product to get to resolve the problem. In eithor case can it be resolve by polishing?
-
Hi, have been using my GR80 for 50K now. Rotated front to rear every 10K. Wear rate is even between inner and outer of the tire. But the previous front tire which was rotated to the rear looks bald on the surface. But there's 0.6cm thread more before hitting the threadwear indicator in the inner tire as well as the sidewall triangle threadwear marker. Tires grip well in wet and dry. Just a little noiser than before. Its 1yr 8month old now. Should I change based on the thread wear marker or just by eyeballing the surface? Thanks!
-
Why the road surface in KPE is bumpy ? No matter which direction, lane 1 to 3, all have the same condition. Millions of dollar have had spent, why can't the road be built better ? I don't understand
-
I'm driving a year old picnic with 15" stock tyres and had encountered several near misses during sudden braking (even at leass than 50km/h), especially on 1/2 wet surface such as HDB MSCarpark and expressway. These happened if I need to do a sudden brake on a wet surface. On braking I could sense the ABS working by the 'noise & jamming action' felt on my foot. At these moment I tended to release the brake and reapply again (as I felt the action of the ABS does not brake the car immediately but instead seem to glide the car). I had read from manual that for ABS to work we should just step on the brake and don't release the brake (like those w/o ABS). Any advise on the above. Thanks.
-
Since early this yr, united states postal service had decided to stop providing surface mail/parcel services, are you affected by this action? I am affected, as my small US base suppliers are no longer able to ship my order via surface parcels(normally packed in 15kg per parcel).Shipping via air cargoes or air parcels will cost me four time more in freight charges[sweatdrop] . The only alternative is via 20ft container and will take me few decades to clear all of them . Even if I can clear them, the storage fee kill me
-
Been using Klasse Combo. Once a while use Menzerna HGAS after car wash. Now I noticed the cloth gets a bit dirty after applying HGAS (car wash done of course - using Meiguir NextTech Car Shampoo). If I use AIO, the MF applicator turns black very quickly, rinse in water a few times no use, must leave it overnight in Dynamo for the dirt to disappear. Any suggestions how to "clean" the paintwork surface ? A few rounds of AIO? Claybar?
-
Curious to know if any1 tried different or no prep prior to sealant and/or waxing; n how's the durability. Senario 1 Claybar then sealant Senario 2 Wash+shampoo Sealant Senario 3 Wash (water) Polish Sealant Senario 4 Wash (water) Sealant Any1 wanna share experiences? Tks!
-
I've got an old Amp from previous car. The only details it shows on the surface are the brand MACROM, it's a 4 channel amp. But did not state the watt power. How do I know the watt power, any way to find out? There this info stating a MOSFET 4.13. Does that mean anything at all? Thanks in advance! -
The original poster boasted of 2 coats of AIO, 6 coats of Platinum Paint Protection and 4 coats of Mother's Carnauba. The next guy shot him down with a picture of his car with just sealant! Link: http://www.web-cars.com/detail/phorum/read...i=12057&t=12057
-
for the finishing of rims, what are the difference between Polished, Mirror Lip, Adnodised , Gun Metal Polished, Hyper silver/black and chrome in terms of performance, appearace, price, durability and reliablity?
-
i notice that my brake rotor surface seem abit rough... i know that there is something trimming of the brake rotor surface make it smooth... but anyone know whether is it advisable??? ? ?
-
How Does Ur Car Performs?
-
I know some people may say re-surfacing/skimming is no good, but I've a few deep scratches on the brake disc .. Where can I get it resurfaced ?
-
Hi guys, Newbie query here - found some (qutie a few, actually) surface scratches on the roof of my Toad yesterday while washing it (no idea how they got there - suspect either someone whom I gave a ride to put them there with his/her watch or bangle or something like that or someone out there really hates me and/or my Toad[:(] ). Thankfully they're not THAT deep. Anyway, was wondering what would be the advice on addressing these marks - for example, what sort of polishing compound should I use and how should I go about taking care of it. Thanks in advance....
