Search the Community

Anyone knows any shop that does good cubic printing (for interior) to recommended.

Dear All, I will like to enquire which is the preferred way to do "carbon fibre" on my internal car parts, i.e those plastics. Pls advise on the cost, duration required to do up the parts and the pro and cons of each method? If can enlighten me on the workshop that will be great! Driving my07 wrx, internal parts are similar to the impreza sedan. Much appreciated!

Was at customer site and parked the whole day, then when I exit the carpark, I forgot to press to receipt for claiming!!! Freaking $13 parking. Anyone know if the ATM or AXS can print the details from the cashcard usage? Thanks a billion!

hiya anyone knows how and where to print cash card transactions - ie past 4 mths? i know ATM and cash card readers can only print last 5-10 transactions. anyone???

Mindless money printing- the S$308.4032B reason why Singapore inflation is so high nowadays. According to video 'Causes of inflation: Cost-push and demand-pull'[ ] Cost push inflation is input cost inflation caused by land, labour, capital, entrepreneurship- any increase in the cost of these factors increases the final product cost (i.e. an increase in CPI(Consumer Price Index)). Demand Pull inflation is caused basically by the demand upon certain goods, as measured by the number of dollars people are willing to wage to attain a certain product. In the general scheme of things, in so far that consumers and suppliers of goods and services (we are all participants in each part in our daily affairs) remain decent and honest persons, with the tendency to 'consume' measured by one's tendency to 'produce'(productivity)- then theoretically, there would be NO consistent CPI rise except the occasional isolated demand/supply imbalance due to natural disaster or war. But Singapore is quite insulated away from any significant natural disaster or war, so why has the average price of goods between 1989 (CPI=71.3) and 2009(CPI=100) increased (inflated) by (100.0-71.3)/71.3 = 40.25% over the 20 years?? [see Pict: 'Singapore Annual Inflation rate and CPI (1980-2012)/Singstat'] Studying the chart about 'Singapore Money Supply (DBU), M1,2,3, 1989 to 2012' for monetary supply changes between 1989 and 2009, one would easily note that M1 (Narrowly defined, money supply (M1) consists of currency in active circulation and demand deposits) M1 grew from S$13.7446B (1989) to S$93.4721B(2009)- a whopping 5.8fold increase over the 20years documented. (WRT to the M3 numbers of S$71.0078B(1989) vs S$378.5260(2009), the increase is a 4.33fold increase over 20 yrs) The official foreign reserves of Singapore between 1989 and 2000 are not available but according to 'Singapore official financial reserves (2001-2011)', the totals were S$139.7143B(2001) and S$308.4032B(2011)- amounting to a 1.207fold increase over the 10 year period (of course subject to variations in international currency exchange rates [SGD exc rt, 2001-2011]). According to 'Singapore Time Series on Population (Mid-Year Estimates)' using the 20 year interval where census were taken between 1990 and 2010, the local resident population increased from 2735.9K (1990) to 3771.7K(2010): a 37.86% Singapore resident population increase over the 20 years mentioned. Singaporeans have not become more lazy, on the contrary, according to 'Singstat: Trends in Productivity and Value Added by industry' 'total economy' (large olive green dot) productivity in Singapore has certainly increased between 1991 and 2011. Whilst currency exchange rates may be a proximate measure of the relative depreciation of a nation's currency relative to others due to the effect of over supply of one nation's currency as compared to that of another, it cannot be denied that all nations around the world, led by the USA, are into a conspiracy of freely printing money which is of course inflationary 'Chart: Estimated global monetary Aggregates (1971-2010)' - the chart showing an approx 3 fold increase in world M3 money supply between 1989 to 2009. Thus in 'Singapore's inflation may remain elevated for years to come: survey' [CNA, 24Jan2013] "survey by the Singapore Management University (SMU)... composite five-year-expectation is 4.97 per cent" Guess Singaporeans are all victims of a world wide government conspiracy to keep them always working (savings are always eroded by inflation) till the day they die, and also in power (the SG govt has S$308.4032B(2011) alone in foreign reserves and gold). So moral of the story is that governments all around the world should stop printing so much money to keep inflation under control and voters need to demand so (so as to safeguard one's retirement years). Guess in Singapore, recent curbs upon car loan and housing loan quantum(s) are merely cosmetic changes meant to fudge inflation statistics yet do minimal to improve the lives of the poor and downtrodden. Perhaps the Singapore government could lead the way forward by firstly not printing so much money which only breeds inflation if not hyper inflation as the population growth within a limited land area can only be so much. Perhaps the Singapore government could start the discussion by explaining to the populace what it intends to do with its SGD 308.4032B(2011) in foreign reserves (should be more by now), and please be reminded, that convenient half truths by Ministers really do not help. Picts below, Rgds, B.C. [PictSource: SG money supply] [PictSource: 'Singapore Annual Inflation rate and CPI (1980-2012)/Singstat'] [PictSource: SG official Foreign Reserves (YOS2012)] [PictSource: Time Series on Population (Mid-Year Estimates)(1970-2012)] [ ] [PictSource: SGD exc rates, finance (2001-2011), YOS2012] Tags: Inflation, foreign reserves, gold, government, Singapore, politics, printing, corruption, fraud, democracy, dictatorship, capitalism, currency, gold standard, Anyhow, nice music that I like that U too might like: .

need to print some advertising material....so wan to know if anyone got lobang

Hi Guys, Anyone can recommend a place to do customized car decal printing? Looking at something more rectangular like 20cm x 10cm those kind instead of just the normal round ones. Thanks in advance!

hi guys, anyone got lobang for catalog printing? i got some adhoc stuff to print, so cant wait to send to china to print. anybody can recommend a printing company that does catalogs at a reasonable price? thanks in advance guys cheers!

lets say i am outdoors...no access to fax machine or computers, where can i go to get somethings printed from the internet i dont mean photocopier machines but where to get things from internet printed? anyone can assist ?

Hi Guys, Any idea where I can get balloons printed with words of my choice? I'm not looking at a big order, just a very small quantity, probably under 10pcs..

Hi guys, I need recommendation for vendors whom design + printing of corporate T-shirt. Any vendors to introduce, and strictly vendor only (no free-lance) since the payment will be transacted through Purchase Order. Thank you.

Hi, Anyone knows where I can find this service whereby I can print a customised picture on a porceline cup ? Thanks!

hi wondering if anyone else had this issue just realised i had this problem after trying out on IE8, Firefox, Opera, and Goggle Chrome that if i try to Print a webpage directly from any of the mentioned browser, File -> Print ALL of them will notify it has 'crashed' and need to restart! IE8 pop up a DEP error initially i thot it was the silly IE8 but with the 3 other browsers also behaving in similar way i think the prob run a bit deeper btw, am running XP hope some IT experts here can shed some lights cheers & TIA

Anyone good in MS powerpoint can help me? I am printing my lecture notes, 4 slides to a page..but right now, i'm having problem maximising the page.. I wanna maximise the paper usage by trying to enlarge the slides as much as possible..but can't seem to do it in powerpoint..is there anyway i can adjust the printing border in ppt? I have attached the pic for reference.. Thanks

Any bros want to cubic print their Superb internal door handle(the rubberized part), found that Servotronic offers it at a $238 for 4 doors. I am going to get mine done, was wondering if any bro want to get thier's done too. They have various colors to choose from.

hi all, i need a make a batch of small plastic bag tat comes wif customize logo can sure lobang?

any bros have any idea? or has any one tried e above to their interior? backside itchy to try it on my ride

Hi all, Some of us have appointed Jackson Vehicle to cubic print the door handles, in view of the peeling soft wax layer. After the handle covers are removed, it is still possible to close the doors. However, please take special care when closing the driver's door. It is recommended to close the door using the edge of the door pocket. Caution Do NOT pull the driver's door at the usual driver's side handle location. The black plastic frame that allows the handle cover to be attached will snap if you pull it. Some pictures to show how the doors look like after the door handle covers are removed.

Wat is the market rate? Any recommendations? Thanks!

Hi Admin, Wonder if you can add some feature options during the "Print Threat" to not to include certain information like Graphics & banners. This is to save tremandous amount of printer paper & ink usage. I think most who print the forum threat would agreed with me on this suggestions. Thanks for your help. Kind regards