Search the Community
Showing results for tags 'Magnet'.
-
Bros who have used this product, please advise. Is it really that good? Or is it another over-hyped product? At $25 per piece, it is the most expensive MF towel I've seen so far. If it works as well as its ad, don't mind paying for it.
-
Anyone knows who carry in or where to source for 2010 Audi A3 windows magnet or clip type sunshape. Lots seller only on new models Pm me if any seller. Thx
-
Anyone knows where to get for a 2010 Audi A3 hatchback model ? Need the magnet or clip on sun shade for rear Windows. Lots seller never sell old model anymoret. Any one knows who sulplies ?
-
Anyone can spot the fake part here ?
-
Every few months or so, i have this feeling. There you are on the road, minding your own business, alert of cars around you and the surroundings. Not speeding and also not road hogging. But other cars just like to drift into your lane, or coming close to a side swipe situation I just had it last Fri and is still happening. Car banged into back of my car during morning heavy traffic, driving a rental car now, but yesterday evening a Odyssey nearly missed my back again but that's after a bendy bus drifted very near my side. already went to temple to ask guanyin niang niang to protect me.
-
hello fellow bro, anyone heard of fuel magnet b4? i heard from my fren that it can increase fuel efficiency. figures from him, he is able to travel around 50km extra with 1 full tank of petrol wif similar driving habits. also, its installed in performace car to improve fuel effiency, the brand he recommended was "SUN"(or rather pronounced as SUN) anyone here used it b4 or perhaps might noe more bout it. hope to hear ur comments. Thank you.
-
Hi all, Anybody know where I can buy magnet strip,somemore I need strong ones.
-
In England, a large bar magnet was fitted to a road sweeper that patrols the highways in the southeastern part of the country. The magnet picks up metallic debris that could otherwise cause damage to cars traveling the road. http://www.pistonheads.com/news/15322.htm Hope to see this implemented in Singapore, leaking tyres caused by metallic punctures when be drastically reduced.
-
Hi , For those who have enquire about the water magnet towel,it has arrived.Limited pcs onli
-
Purchased this towel today and I'm pleased with its performance. It absorbs lots of water and I can dry the car faster, the edges are finished with satin to prevent scratching. Besides that, it does not cause any water smears on the paint and is wonderful to use on glass as well. Size wise, its slightly longer than 2ft. Much better than my cotton drying towels. More reviews: http://meguiarsonline.com/forums/showthrea...et+Drying+Towel
-
Hi, I know I'm going to sound silly, but what's the difference between a fuel cracker and a fuel magnet? which one does RMK Ion Booster fall under? I suspect its the same thing, but surprisingly I've seen advertisements for both RMK fuel magnet and Ion Booster... Or is it all snake oil?
-
I know there are a large number of MCFers who bash and tell of the ills of magnets. For this, I do not apologise I am from this camp. However, if you are interested in experimenting w/o paying astronomical prices for fuel magnets, let introduct to you......... CLICK HERE -----> UNITED NUCLEAR! Look below of the link for the most powerful magnet. Used for steering nuclear particles! NOT A TOY! Buy and the gahment might think you are building a thermonuclear device! I want to use it on my oil filter. On a side note: Some of the most powerful magnets in the world, and at an excellent price. The strength of the magnet is measured on some scale, these are 48, 50 is the max. they _WILL_ give you nasty blood blisters, and you SHOULD NOT LET KIDS PLAY WITH THEM!!!!!! Taken as a warning from an eBay seller: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...item=6143140279
-
Hi , does anyone fix Fuel magnet on fuel line to crack fuel for bettter fuel consumption ??any effect on engine performance ? pls advice
-
This is in US dollars, sold by this warehouse company that sells cheap stuffs. http://www.harborfreight.com/cpi/ctaf/Disp...temnumber=36098
-
http://www.ftc.gov/opa/2001/11/gadget.htm Snake-oil got exposed!!
-
Has anyone heard of the above mentioned? There's this guy from Toyota club selling this Z-Stab thing together with some super strong $1.50 magnets. Any skodas installed it yet?
-
OK, need some help here. I've magnets that are pretty big. Double the width of my fuel hose. My intention is to cut them 1/2 so that I can mazimie the coverage. Question is how to cut magnet ? I know magnet is brittle, and breaks easily. I can hammer it, but sure "cui" one ... I doubt I can saw it. Can I just cut a line and hand break it ?
-
hi saw on the classified ads that they are selling magnets at $38 only. anyone tried it? feedback!!
-
I know this topic has been discussed to death. Want to hear from all the forumers here abt their thoughts on DIY the fuel magnet thingy. I buy into the theory abt polarising the fuel molecules to one polarity and the air intake to another polarity. Since if I just use a south magnet to polarise the fuel, the fuel molecule that are not polarise are North right? I've abt a dozen HDD magnets lying around and infact installed some of them around my fuel line/ air intake in my car. The magnet is arrange in such a way that a pair of magnet is attracting each other. Magnet * Fuel Line * Magnet = N * Fuel Line * S = S * Fuel Line * N Same goes for the air inatke except its arrange in a ring around the intake hose. By arranging the magnet this way, does the fuel into N and S. So when they enter the combustion chamber, the fuel/air of different polarity will attract and result in better combustion. Of course, it maybe the fuel and air N and S will attract thus resulting in Nil. I know this is a little confusing but. I'm trying to achieve as much as possible with as little as possible $$$ spend. I guess, what I'm trying to say is : What is the cheapest, most econmomical way to achieve the best possible result with regard to this fuel magnet thingy. Thank you Keat..
-
Hey guys & gals Any of you have the Bear Trap BT500 oil filter magnet on your ride? How is it? Comments please. Cheers Cool_jazz
-
Very nice packaging ... but the magnet is very very tiny ..
-
hi, anyone DIY magnet? I would like to check how do you hold/fix the magnet to the location (like fuel line). Thanks..
-
I've heard of placing magnet on the air intake ... Wat's the rational in placing on the air intake pipe ? My perception is that air intake pipe is thick and high flow rate ... as such, a small magnet (no matter how strong) cannot cover the whole intake pipe in full ... Placing 2 magnets at opposite ends is also touch, since it will be difficult to mount it on the "far, unseen, bottom" end of the pipe. Can someone please help enlighten ? Thanks
-
Hi experts out there, especially Cool, I have the broquet BM30 installed on my car, recently, I have been hearing alot about the fuel magnets and was wondering if there would be a problem using these magnets on the fuel line..........for example, with the metal ore additive from the broquet clog up the fuel line where the magnets are??
-
Hi all fellow MCFs, for those who recently have their Ganvinzers installed, please post your feedback in this trend. Please indicate your Car model, CC and whether Auto/Mannual thanks
