Search the Community
Showing results for tags 'Lighting'.
Found 20 results
-
At ST Mobile Audio Auto Accessories, we believes awesome sound system does not refer to expensive audio products, but rather a good integration of proper audio components, speaker placement and sound tuning. Regardless you are enhancing your current sound system or building a new system, you will be able to receive correct recommendations base to their knowledge and experience over the year from this merchant. In order to sharpen workmanship and judgment, ST Mobile sends their installers to participate in various car audio competitions, winning quite a number in the process. Our Services: In Car Entertainment General Accessories Car Camera & Electronics Car Alarm & Security System Bodykits & Parts Air Conditioning (Repair & Servicing) We are dealing with car audio, car accessories & car air-con services. Pls do contact 62661719 if there's any enquires Address: 160 Sin Ming Drive #08-02 Sin Ming AutoCity S(575722) Opening Hours: 10am - 7pm (Mon - Sun) including PHs Contact No: 62661719 Join our FB Group for Car Accessories & Audio Discussion: https://www.facebook.com/singtradeaudio/
-
During my holiday in Hong Kong, I dropped off a roll of film to be processed. Upon asking for the images to be printed out and mailed to Singapore, I was told that it would take up to two months, since the photos would be sent via post. I did not look for one-hour developing services in Hong Kong. After all, this roll of Kodak Portra 400 took me at least two months to finish, so what's the hurry? Besides, between work and weekend errands, the time to shoot is limited. Hence, I decided to finish the roll while I was overseas. I was mentally prepared to only receive the images in late April/early May. To my surprise, they arrived a month early. As I held the weighty brown envelope in my hands, I felt a stack of photos in the middle. (Image: Chase Yi, Unsplash) My pulse quickened. Part of me assumed that I had made a mistake loading the film and that nothing was captured because of it. Or that most of the photos were so blurry, overexposed or underexposed that very few pictures were printable. The thick stack said otherwise. I was excited, but also cautiously optimistic. Once the missus and I opened the envelope, we each took a small pile to look through. All the images were in focus, but many of them had underexposed areas. (Image: Ddddddarya, Unsplash) Lessons to remember As it turns out, my Pentax Spotmatic F gives better exposure when the needle of the light meter is past the halfway mark. If it's just in the centre, the image will be slightly underexposed. After reviewing the photos again, I reflected on what I could have done better. I should be stricter about the lighting conditions and not be afraid to use a slower shutter speed. Some backgrounds could be better, so I should watch my compositions more as well. Following this, I thought, "Damn, film is brutal, isn't it?" Well, poor technique will be magnified, that's for sure. I don't get to preview an image, delete it and try again. Pushing or pulling film has its limits as well, and I'm reliant on the shop to process not as I see fit, but as they see fit. (Image: Immo Wegmann, Unsplash) A smile began to spread across my face. I couldn't blame the film, the camera or my lens. It was all down to me. And that made me feel good. Before every frame, I would picture the composition and see where the light was falling. Then I'd adjust the aperture and shutter speed. In all that time, it never mattered what camera I had or what lens was on it. As for the film stock, that was decided 36 frames ago. It felt so liberating to only think about the picture I wanted. Film isn't brutal. It's not a sentient being that judges you. Film is impartial. It exists as a medium and its only job is to show you what you've accomplished and tell your story. It's not out to stroke your ego or shatter your pride. And for that reason, if I don't control myself, I'll be needing to purchase more photo albums in the future. So, for the next roll of film, I'll keep the negatives and settle for having the photos scanned and kept in Google Drive instead. – Jeremy (Main image: Chase Yi, Unsplash)
-
Any bro/ sis bought their ceiling fan or lighting from JB? Pls share your experience.
-
i wanna change it to blue. any bros got recommendations on workshops?
-
Anyone can recommend me a place to change my altis cabin lighting to led bulbs? Preferably philips one as they seems more reliable. Or where can I buy my own to change if it's not too difficult?
-
Hi folks, Today went to Viacom for inspection and failed. As I'm the 2nd owner, thus, I wasn't aware what did the previous owner did. Anyway, he has changed the front headlight to HID and LEDs for the rear and front-small light. So Viacom failed all the lighting related test section. So do any folks have any workshop who is expert in this area and help me to get my car back to compliance ? I only afraid some workshop assume this and that, end-up, I fail again and have to re-do all over again. Worse, my road tax is expiring soon, so I need to get it done quickly. Many thanks ! Cheers,
-
Need to fit out lights in my new condo. Any recommended shop?
-
Dear bros/sis, I have recently begin preparing my vehicle for CNY (haha). As you know, swirl mark occurs over time irregardless whether we like it or not. I recently spent 4 hours plus manually removing it by hand. No doubt I am glad that all marks are gone from my bonnet, I now have to face reality that I have the rest of the car to deal with T_T So I was wondering if any bros/sis have seen those buffer machine they use to polish cars but can be operated by ciggy lighting plug instead of the normal power socket plug. Cause living in HDB means I have no access to power points at ground level car park. Was hoping if this machine exist, I can buy it and that should reduce my time needed for removing the rest of the swirl marks from the remaining portions of the car. Thanks in advance.
-
Plan to replace all my more than 30 years lighting in my house. Can anyone out there recommend a reliable local online store. TIA
-
Anyone keen to change all the interior lighting to LED For their Skoda?
-
We normally see laser lights used on numerous applications such as barcode scanners, optical disc players, laser lighting displays and etc. What if it was applied onto vehicles as headlights? That would look really nice, especially in the dark. BMW recently announced that they are moving towards advanced lighting technology and they showcased it onto their i8 concept car at the recent 2011 Frankfurt Auto Show. Now, BMW announced that we will see laser headlights (part of BMW
-
Anyone has recommendation for workshop who can bake my lights and open it up, do some small modification and then seal it back up again? Seems like every shop nowadays go for direct bolt on. where are all the customization workshops? Willing to pay for professional work!
-
BMW is illuminating the future as the company has announced two new lighting technologies. First up, the Dynamic Light Spot system uses an infrared sensor to detect any animals or pedestrians that are 100 meters (328 feet) in front of the vehicle. When something is found, a beam of light is focused on the object to alert the driver. BMW has also developed glare-free high beam assistant. Details are limited, but the company says the system uses a camera to detect oncoming traffic and then "masks" the headlights to prevent glare. BMW didn't say when to expect GFHBA, but indicated the DLS system will be offered as part of the Night Vision package. Source: BMW
-
Hi forumers, Recently added a changer on the back of the boot.. didn't realise the changer has actually blocked the lighting in the boot.... anyone knows where i can get the lighting to be re-positioned or even add more lights to the boots?? thanks bros...or sis..
-
Was there few months back while they were doing testing, I already saw some defective panel. Today happen to be there, I beleive the mall is open for business but the LED panel still not wroking properly ... Who is the owner for the mall? Are they going leave it as it is?? Its damn eye sore .... If you want to do it, do it properly, else ple remove all the LED display ....
-
Can anyone confirm these story I heard in regards to this afternoon lighting strikes our Singapore icon the "Merlion" at the mouth of Singapore river....... It happen around 5pm and the lighting striked the Merlion tail. Is this a Good or Bad omen ....... Tried to gather news from CNA and until now nothing reported in the news.
-
Ehh.. is it spoil liao or what? what can be done huh? 50++ LED inside leh.. cannot be replace everything right? somemore cannot open up one leh, who open before?
-
Thinking of installing those neon blue lights which illuminate the floorboard on both the passenger and driver's floorboard. Can I connect it such that it only turns on when i switch on my fog lights ? Any bros have done it and how much does it cost ?
-
Any bros out there know where are the shops that does undercarriage neon lighting that are durable and water proof? maybe we can make a list and the damage we might be expecting. Also I i guess if the shop can do undercarriage they can do floor board too right? many thanx in advance
-
Not for the faint heated. http://www.tfhrc.gov/safety/hsis/pubs/envseries.htm There are 400 pages worth of info here. Don't go through it unless you are bored stiff, Jenna Haze does not excite you anymore or you are jobless. It confirms that yellow light is still the best if you are really serious into driving safely at night. The more yellow the better, like those used in Le Mans races. However, yellow bulbs are not environmentally friendly if you used them up and want to throw them away.
